Engineering Trivia Questions for College Students — page 3
162 trivia questions with answers, college. Multiple-choice trivia with answers, sorted by topic and level. Reveal the answers below, pick one at random, or present them full-screen.
- 101.
Stability of a transmission line can be increased by
- Aboth A and B
- Bshunt reactor
- Cshunt capacitor
- Dseries capacitor
Answer: both A and B - 102.
The output of the system has an effect upon the input quantity, then the system is a
- Aclosed loop control system.
- Bopen loop control system.
- Cnone of the above.
- Deither A or B.
Answer: closed loop control system. - 103.
Low frequency supply is necessary for direct core type induction furnaces because
- AWith normal frequeny supply the electromagnetic forces causes severe stirring action in the molten metal.
- BNone of the above.
- CBoth A and B.
- DMagnetic coupling between the primary and secondary circuit is poor.
Answer: Both A and B. - 104.
Which one of the following is not a vectored interrupt?
- AINTR.
- BTRAP.
- CRST 6.5.
- DRST 7.5.
Answer: INTR. - 105.
If all the elements in a particular network are linear, then the superposition theorem would hold, when the excitation is
- AEither AC or DC
- BDC only
- CAC only
- DAn Impulse
Answer: Either AC or DC - 106.
If a Hexadecimal number needs to convert to binary. For each hexadecimal digit, there will be how many bits
- A8
- B4
- C2
- D1
Answer: 4 - 107.
When checked with an ohm meter an open resistor reads
- Alow but not zero.
- Binfinite.
- Chigh but within tolerance.
- Dzero.
Answer: infinite. - 108.
In AC circuits, the connection of measuring instruments cause loading effect errors which may effect
- Aboth of above.
- Bonly the magnitude of the quantity being measured.
- Cmagnitude, phase and waveform of the quantity being measured.
- Donly phase of the quantity being measured.
Answer: magnitude, phase and waveform of the quantity being measured. - 109.
Electric drive is becoming more and more popular because
- Ait is simple and reliable.
- Bit provide smooth and easy control.
- Call of below.
- Dit is cheaper in cost.
Answer: all of below. - 110.
The illumination at a point 5 meters below a lamp in 6 lux. The candle power of the lamp is
- A140.
- B150.
- C30
- D200.
Answer: 150. - 111.
A combinational PLD with a programmable AND array and a fixed OR array is called a
- APAL
- BPLA
- CPROM
- DPLD
Answer: PAL - 112.
Instantaneous power in inductor is proportional to the
- Asquare of the rate of change of current.
- Bsquare of instantaneous current.
- Cproduct of the instantaneous current and rate of change of current.
- Dtemperature of the inductor.
Answer: product of the instantaneous current and rate of change of current. - 113.
Both the ALU and control section of CPU employ which special purpose storage location?
- AAccumulators
- BBuffers
- CRegisters
- DDecoders
Answer: Accumulators - 114.
The ROM programmed during manufacturing process itself is called
- AEEPROM
- BPROM
- CMROM
- DEPROM
Answer: MROM - 115.
How many entries will be in the truth table of a 3 input NAND gate ?
- A3
- B6
- C8
- D9
Answer: 8 - 116.
Electrical analogous quantity for spring element (K) in force-voltage analogy is
- A1/C
- BC
- CR
- DL
Answer: 1/C - 117.
Two infinite parallel metal plates are charged with equal surface charge density of the same polarity. The electric field in the gap between the plates is
- Adependent on coordinates of field points.
- Bsame as that produced by one plate.
- Cdouble the field produced by one plate.
- Dzero.
Answer: zero. - 118.
Which system is also known as automatic control system?
- AOpen loop control system
- BClosed loop control system
- CEither A or B
- DNether A nor B
Answer: Closed loop control system - 119.
Systematic errors are
- Aall of the above.
- Benvironmental errors.
- Cobservational errors.
- Dinstrument errors.
Answer: all of the above. - 120.
Which number system has a base of 16
- AHexadecimal
- BNone
- COctal
- DDecimal
Answer: Hexadecimal - 121.
In the toggle mode a JK flip-flop has
- AJ = 1, K = 0.
- BJ = 0, K = 0.
- CJ = 1, K = 1.
- DJ = 0, K = 1.
Answer: J = 1, K = 1. - 122.
What will be the total flux emitted by a source of 60 candle power?
- A754.2 lumens.
- B60 lumens.
- CNone of these.
- D0.001326 lumens.
Answer: 754.2 lumens. - 123.
A motor has a thermal heating time constant of 50 mm. When the motor runs continuous of full scale, its final temperature rise is 80° C, what would be the temperature rise after 1 hour, if the motor runs continuously on full load?
- A56° C.
- B58° C.
- C55.9° C.
- D60° C.
Answer: 55.9° C. - 124.
Which of the following windings are necessary in case of all dc machines?
- Aopen type winding
- Blap winding
- Cclosed winding
- Dwave winding
Answer: closed winding - 125.
A quartz crystal oscillator consists of
- Aneither series nor parallel frequency.
- Bonly parallel resonant frequency.
- Cboth series and parallel frequencies.
- Donly series resonant frequency.
Answer: both series and parallel frequencies. - 126.
Thin laminations are used in a machine in order to reduce
- ACopper losses
- BEddy current losses
- CBoth A and B
- DHysteresis losses
Answer: Eddy current losses - 127.
The magnetisation and applied field in ferromagnetic materials are related
- Anon linearly.
- Bsinusoidally.
- Cparabolically.
- Dlinearly.
Answer: non linearly. - 128.
A metal surface with 1 meter radius and surface charge density of 20 coulombs / m2 is enclosed in a 10 m side cube. The total outward electric displacement normal to the surface of the cube is
- A10π coulombs.
- Bnone of these.
- C40π coulombs.
- D80π coulombs.
Answer: 80π coulombs. - 129.
Which of the following is/are the disadvantages of an open loop control system?
- AUnreliable.
- Bboth A and B.
- CInaccurate.
- Dnone of the above.
Answer: both A and B. - 130.
Electrical analogous quantity for dash-pot in force-current analogy is
- Acapacitance.
- Bresistance.
- Cconductance.
- Dinductance.
Answer: conductance. - 131.
Inintel 8085A microprocessor ALE signal is made high to
- ATo disable data bus
- BEnable the data bus to be used as low order address bus
- CTo latch data D0-D7 from data bus
- DTo achieve all the functions listed above
Answer: Enable the data bus to be used as low order address bus - 132.
Speed control by variation of field flux results in
- Aconstant power drive.
- Bconstant torque drive.
- Cvariable power drive.
- Dnone of the above.
Answer: constant power drive. - 133.
Which oscillators are easy to fabricate in a monolithic IC?
- AHartley oscillator.
- BWien bridge oscillator.
- CCrystal oscillator.
- DRelaxation oscillator.
Answer: Relaxation oscillator. - 134.
Purely mechanical instrument cannot be used for dynamic measurements because they have
- Ahigher response time.
- Blarge time constant.
- Call of the above.
- Dhigh inertia.
Answer: all of the above. - 135.
Stack is also known as
- ALIFO memory
- BFIFO memory
- CLILO memory
- DFlash memory
Answer: LIFO memory - 136.
Deflection method direct measurements are most widely used as these are
- Aleast time consuming.
- Bmost simple.
- Cmost accurate.
- Dmost simple and least time consuming.
Answer: most simple and least time consuming. - 137.
In Digital Logic Designs, GAL is abbreviated as
- AGeneric Array Logic
- BGeneral Advance Logic
- CGeneric Advance Logic
- DGeneral Array Logic
Answer: Generic Array Logic - 138.
What will be the number of lamps, each having 300 lumens, required to obtain an average illuminance of 50 lux on a 4m * 3m rectangular room?
- A5
- B4
- C2
- D6
Answer: 2 - 139.
Which of the following is/are the advantages of a closed loop control system?
- Aboth A and B.
- BThe closed loop systems are less affected by noise.
- CThe closed loop systems are accurate.
- Dnether A nor B.
Answer: both A and B. - 140.
What is used to protect the SCR from over current ?
- ACB and fuse.
- BSnubber circuit.
- CHeat sink.
- DVoltage clamping device.
Answer: CB and fuse. - 141.
For intermittent work which of the following furnace is suitable?
- AIndirect arc furnace.
- BCore less furnace.
- CNither of above.
- DEither of above.
Answer: Indirect arc furnace. - 142.
Four identical alternators each are rated for 20 MVA, 11 KV having a subtransient reactance of 16% are working in parallel. The short circuit level at the busbar is
- A100 MVA
- B400 MVA
- C500 MVA
- D125 MVA
Answer: 500 MVA - 143.
For an SCR gate cathode characteristic is a straight line of 130. For triggered source volume of 15 V and allowable gate power dissipation of 0.5 W compute the gate source resistance?
- A111.9 ohm
- B108 ohm
- C11.19 ohm
- D115 ohm
Answer: 111.9 ohm - 144.
The concept of V/f control of inverters driving induction motors resuls in
- Ahormonic elimination
- Bspeed reversal
- Creduced magnetic loss
- Dconstant torque operation
Answer: constant torque operation - 145.
In electrical resistance welding material of electrode should have
- Aall of above.
- Bhigher thermal conductivities.
- Chigher electrical conductivities.
- Dsufficient strength to sustain high pressure at elevated temperatures.
Answer: all of above. - 146.
A combinational PLD with a fixed AND array and a programmable OR array is called a
- APLD
- BPAL
- CPLA
- DPROM
Answer: PROM - 147.
Commutator in DC generator is used for
- Acollecting of current
- Bincrease efficiency
- Creduce losses
- Dconvert AC armature current in to DC
Answer: convert AC armature current in to DC - 148.
Which lamp has the best Colour Rendering Index (CRI)?
- AFluorescent
- BHigh pressure sodium vapour
- CIncandescent
- DLED
Answer: Incandescent - 149.
A 0 - 100 V voltmeter has a guaranteed accuracy of 2 % of full scale reading. The voltage measured by the voltmeter is 75 V. The limiting error is in percentage
- A1 %.
- B2 %.
- C2.66 %.
- D3.33 %.
Answer: 2.66 %. - 150.
Length of the cable is doubled, its capacitance C will be
- Adoubled.
- Bone-fourth.
- Cunchanged.
- Done-half.
Answer: doubled.
How to use these trivia questions
- Warm-up. Open a lesson or meeting with 3–5 questions — enough to wake the room, short enough to keep the agenda.
- Review game. Pick 10 questions on the topic you just taught and play them in teams; discuss every wrong answer.
- Quiz night. Mix two or three topics, read each question twice, and give 20 seconds before revealing the answer.
Run them live
Want every person to answer on their own phone, with a timer and a live leaderboard? Use these questions in an EngageSlide Quiz with a live leaderboard — free to start.
Tick questions on any page — your set is kept while you browse (or take the first 10 here) — and they become ready-to-play slides. What is EngageSlide?